- Joined
- Aug 27, 2008
- Messages
- 3,397
- Reaction score
- 0
Electronic Igniter
ElectronicIgniter.com
Possible Website for Selling "Electronic Igniter" systems, parts, schematics, etc.
Water heater ignition, gas heater ignition, etc.
From cupron wire to the electronic circuits for fireworks & model rockets other pyrotechnics.
Google hits for "electronic Igniter" - 145,000
http://www.google.com/#sclient=psy&...l=&oq=&pbx=1&bav=on.2,or.&fp=d184bc9da719dfe6
Other possibilities including Creating your own Website and starting your own Business!
Included in this offer is .48lb, over 6000 feet of 36 AWG Cupron - Copper-Nickel wire; 11.7 ohm per foot. This wire is GREAT for making Electronic Igniters! It heats up real good with even a 9 volt battery depending on how much wire is used. P=IE P=Power - Watts, I=Current, E=Voltage; I=E/Ohms.
2 inches of this wire, ~2 ohms, hooked up to a 12vdc battery will cause 6 amps of current to flow and heat it up to 72 Watts or until it burns up! 72W = 6A X 12Volts
One could make over 36,000 - 2" Electronic Igniters with this spool of Cupron wire! Just coil the wire into a tight - non touching spiral that fits into the model rocket. When the coil heats up it ignites the model rocket engine.
Compare to these Electronic Igniter prices: http://cgi.ebay.com/Estes-Estes-Roc...ultDomain_0&hash=item4155f8d47a#ht_2906wt_982
Great for a model rocket Electronic Igniter! Just add a switch, and the appropriate length of wire to stay safe, between the battery and your model rocket Electronic Igniter and then you control when your model rocket takes off!
This sale does not include the shipping of the Cupron wire, shipping will be whatever it costs to ship it to whomever buys this, if it is sold.
Offer withdrawn because of no offers received, moved to ebay.
Regged at GD, expires in 2012, paypal accepted
ElectronicIgniter.com
Possible Website for Selling "Electronic Igniter" systems, parts, schematics, etc.
Water heater ignition, gas heater ignition, etc.
From cupron wire to the electronic circuits for fireworks & model rockets other pyrotechnics.
Google hits for "electronic Igniter" - 145,000
http://www.google.com/#sclient=psy&...l=&oq=&pbx=1&bav=on.2,or.&fp=d184bc9da719dfe6
Other possibilities including Creating your own Website and starting your own Business!
Included in this offer is .48lb, over 6000 feet of 36 AWG Cupron - Copper-Nickel wire; 11.7 ohm per foot. This wire is GREAT for making Electronic Igniters! It heats up real good with even a 9 volt battery depending on how much wire is used. P=IE P=Power - Watts, I=Current, E=Voltage; I=E/Ohms.
2 inches of this wire, ~2 ohms, hooked up to a 12vdc battery will cause 6 amps of current to flow and heat it up to 72 Watts or until it burns up! 72W = 6A X 12Volts
One could make over 36,000 - 2" Electronic Igniters with this spool of Cupron wire! Just coil the wire into a tight - non touching spiral that fits into the model rocket. When the coil heats up it ignites the model rocket engine.
Compare to these Electronic Igniter prices: http://cgi.ebay.com/Estes-Estes-Roc...ultDomain_0&hash=item4155f8d47a#ht_2906wt_982
Great for a model rocket Electronic Igniter! Just add a switch, and the appropriate length of wire to stay safe, between the battery and your model rocket Electronic Igniter and then you control when your model rocket takes off!
This sale does not include the shipping of the Cupron wire, shipping will be whatever it costs to ship it to whomever buys this, if it is sold.
Offer withdrawn because of no offers received, moved to ebay.
Regged at GD, expires in 2012, paypal accepted
Last edited: